Boat Removal 3 min read

Boat Removal & Hauling in Temescal Valley, CA: Jon Boat Haul

Kurtis By Kurtis

A cold January rain was falling across Temescal Valley when we pulled up to the gate. A farmer called us because he needed an old 16 foot jon boat moved before planting his back lot. The boat sat deep in the weeds with a non-running outboard motor that had an engine seized solid and rust eating through the cooling system.

Getting our rig to the vessel was the hard part. A farm lane with a washout halfway down blocked a straight truck backing. We backed our own truck as far as the washed section, cleared the brush, and worked on foot. Cold water filled the floor, adding hundreds of pounds of dead weight that would bend the aluminum floorboards if raised blind. Our crew pumped out the rainwater first, hooked our winch cables, then rolled it onto dollies across the mud and up onto our trailer. When a strap cinches down on wet metal, you feel the frame settle into the bunks just right.

The title was lost years ago, so we did not transfer a title, but the owner signed the paperwork for a release of liability. We took the metal for scrap metal recycling and brought the rest to a certified boat salvage yard. We cleared the mud tracks, picked up loose hardware, and left the site clean. Property owners in Temescal Valley can reach us at 951-338-8501 for a free quote on boat removal services.

Before
1983 jon boat waiting for boat removal in Temescal Valley, CA
After
Where the boat sat in Temescal Valley, CA, empty and left clean after boat removal

How our boat removal process works on the road

As a rule, we clear the bilge before we ever strain a winch strap. Cold rain sitting in an open fiberglass or aluminum vessel adds eight pounds per gallon, shifting the center of gravity while the rig moves. That hidden weight can pull a hull sideways on the ramps or twist a light frame before the tires hit hard dirt.

Vessel removal in Temescal Valley, CA: the details

JobBoat hauling and recycling
Boat1983 jon boat, about 16 feet
Where it satIn the weeds at the back of a rural lot
Who calledA farmer clearing an old lot before planting it
ConditionAn engine seized solid and rust eating through the cooling system
QuoteAssessed and quoted before the haul
PaperworkRelease of liability, every time
AreaRiverside County, CA

An illustrative, typical Riverside County boat removal, not an account of a particular customer. The photos do not show the actual boat.

Boat disposal services in Temescal Valley: answers

Do you provide dismantling services for boats?

Yes, we dismantle large hulls on site when a vessel cannot travel in one piece. Our crew uses sawzalls and heavy machinery to cut down fiberglass hull sections, strip hardware, and load the pieces directly onto our trucks for proper disposal.

Do you handle hurricane-damaged boats?

Yes, we haul crushed hulls, sunken craft, and storm debris off waterfront lots and docks. Whether a pontoon lies cracked in the mud or a sailboat rests jammed against a pier, we use our own cranes and heavy winch gear to clear the wreckage.

Boat removal across Riverside County, CA

We haul boats all over Riverside County, from Riverside, Moreno Valley, Menifee and Jurupa Valley. Winter rain fills an open boat quickly in these rural valleys. That standing water rots internal wood, ruins boat trailers sitting in deep mud, and turns a light boat removal job into a heavy hoist if it sits untended.

Get a free quote for boat removal in Temescal Valley: call 951-338-8501 or use the contact form.

Ask for an assessment

More ways we help in Temescal Valley

Ray Tolliver. Drove long-haul for twenty years before he started hauling boats. He still thinks in straps, clearances and axle weight.

Share Facebook
Kurtis
Written by

Kurtis