A storm puts a boat where it has no business being, and nobody ever comes back to claim it. A property owner in Tarpon Springs called us in January after a high tide pushed an abandoned 21 foot pontoon boat way up on his sandbar-side lot. The owner did not put it there and he wanted the eyesore off his waterfront grass.
The vessel had weeping rivets along the aluminum seams and a cracked transom bracket on the outboard mount. Sand was buried up to the axles of the non-running rig, with zero firm ground to back a rig close. We brought our own crew and our own crane and trailer to work the job without hired help. First, we pumped thirty gallons of rainwater out of the stern so we were not lifting dead water weight. We set heavy matting on the soft sand, winched the hull onto heavy dollies, and hauled it straight up onto our boat trailers. You could feel the soft wood floor flex under the straps, heavy from absorbing moisture for months.
The aluminum went straight to a scrap recycling plant, and the rest went to a certified boat salvage yard. Since the title was lost years ago, we gave the property owner a full release of liability so he was clear of the abandoned hull. We raked the sand and left the site clean, no debris left behind. If you need boat removal in Tarpon Springs or Pinellas County, give us a call at 727-761-1009.


Lessons from twenty years of hauling heavy loads
As a rule, we prepare for hidden weight when a pontoon boat sits out on Florida sand. Cooler January weather makes the physical work easier on the crew, but humidity has already turned the internal plywood decks into heavy sponges long before we arrive. When we check an old trailer, flaking paint around the axle welds tells us the frame will twist under a winch load if we do not support the main beams first.
Job sheet: boat removal and disposal in Tarpon Springs, FL
| Job | Boat removal with our own crew |
|---|---|
| Boat | 1998 pontoon boat, about 21 feet |
| Where it sat | On a sandbar-side lot after a storm pushed it up |
| Who called | A property owner after a storm left a boat that was not his |
| Condition | Rivets weeping along the seams and a cracked transom bracket |
| Quote | Free assessment first |
| Paperwork | Release of liability, every time |
| Area | Pinellas County, FL |
This post is an illustrative example of boat removal work in Pinellas County, not a record of a specific customer. Photos are illustrative.
Paying for boat removal in Tarpon Springs: FAQ
How much does fiberglass boat disposal cost in Tarpon Springs?
We provide a free quote after looking at the job, then the haul takes place. Final pricing depends on four main factors: the size of the vessel, its location, the overall condition, and the complexity of pulling it out.
Why does fiberglass cost more to dispose of?
A fiberglass hull cannot be melted down like aluminum. The boat removal process requires extra labor to dismantle the deck, separate hazardous fluids, and haul the heavy fiberglass to a solid waste facility for proper disposal rather than simple scrap metal yards.
Boat disposal services near Tarpon Springs
We haul boats all over Pinellas County, from St. Petersburg, Clearwater, Largo and Pinellas Park. Months of intense heat and salt vapor soften transom wood and rot wiring insulation. When winter arrives, that trapped moisture makes old hulls heavy and brittle, changing how our crew straps and lifts a junk boat without snapping the frame.
Got a boat that needs to go in Tarpon Springs? Call 727-761-1009 for a free quote.